CALL US

+86 17838360708

standard method of test for determining asphalt binder

standard method of test for determining asphalt binder

ASTM D7175 - 15 Standard Test Method for Determining the ...

1.1 This test method covers the determination of the dynamic shear modulus and phase angle of asphalt binders when tested in dynamic (oscillatory) shear using parallel plate geometry. It is applicable to asphalt binders having dynamic shear modulus values in the range from 100 Pa to 10 MPa. This range in modulus is typically obtained between 4 and 88°C at 10 rad/s.

get price

ASTM D6723 - 12 Standard Test Method for Determining the ...

1.2 This test method is limited to asphalt binders containing particulate material having dimensions less than 250 µ m. 1.3 The values stated in SI units are to be regarded as the standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use.

get price

Determining Asphalt Binder Bond Strength by Means of the ...

Standard Method of Test for Determining Asphalt Binder Bond Strength by Means of the Bitumen Bond Strength (BBS) Test AASHTO Designation: TP-XX-11 1. SCOPE 1.1 This test method quantifies the tensile force needed to remove a pullout stub adhered to a solid substrate with asphalt binder (bitumen). Samples are prepared at controlled

get price

Standard Test Method for Determining the Fracture ...

5.2 The test method is designed to measure the strength of the asphalt binder at the critical cracking temperature. The asphalt binder has limited ability to resist stress without cracking. In the asphalt binder Specification D 6373, failure stress is used to determine the critical cracking temperature.

get price

AASHTO T 313 - Standard Method of Test for Determining the ...

Jan 01, 2019  Test results are not valid for beams of asphalt binder that deflect more than 4 mm, or less than 0.08 mm, when tested in accordance with this method. This standard may involve hazardous materials, operations, and equipment. This standard does not purport to address all of the safety concerns associated with its use.

get price

AASHTO T 315 - Standard Method of Test for Determining the ...

Jan 01, 2020  This test method covers the determination of the dynamic shear modulus and phase angle of asphalt binder when tested in dynamic (oscillatory) shear using parallel plate test geometry. It is applicable to asphalt binders having dynamic shear modulus values in

get price

Determining Asphalt Binder Bond Strength by Means of the ...

T 40, Standard Method of Test for Sampling Bituminous Materials T 315, Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer. 2.2 ASTM Standards: D4753, Evaluating, Selecting, and Specifying Balances and Standard Masses for Use in Soil, Rock, and Construction Materials Testing

get price

Method of Acceptance for Asphalt Binders

• T 315 - Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) • T 316 - Viscosity Determination of Asphalt Binder Using Rotational Viscometer • T 350 - Multiple Stress Creep Recovery (MSCR) Test of Asphalt Binder Using a Dynamic Shear Rheometer 2.2 ASTM Standards

get price

Method of Acceptance for Asphalt Binders

• T240-Rolling Thin-Film Oven Test • T 313- Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR) • T 315- Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) • T 316- Viscosity Determination of Asphalt Binder Using ...

get price

DIME - Print Sample Report

Jul 10, 2021  DIME Test ID: 2021-07-10-4-1 Test Method : AASHTO T240-17: Standard Method of Test for Effect of Heat and Air on a Moving Film of Asphalt Binder (Rolling Thin-Film Oven Test) Verified Date : 07/23/2021

get price

Standard Test Method for Determining the Fracture ...

5.2 The test method is designed to measure the strength of the asphalt binder at the critical cracking temperature. The asphalt binder has limited ability to resist stress without cracking. In the asphalt binder Specification D 6373, failure stress is used to determine the critical cracking temperature.

get price

Determination of the Asphalt Binder Content of Bituminous ...

Standard Method of Test for . Determination of the Asphalt Binder Content of Bituminous Mixtures by the Ignition Method . 1. SCOPE. 1.1 This method of test determines the asphalt binder content of bituminous mixtures by heating the mixture until the asphalt binder fraction of the mix ignites and is burned away. The gradation of

get price

Standard Test Method for Determining the Flexural Creep ...

E 77 Test Method for Inspection and Verification of Ther-mometers5 2.2 AASHTO Standard: AASHTO MP1 Standard Specification for Performance Graded Binder6 2.3 DIN Standard:7 43760 3. Terminology 3.1 Definitions: 3.1.1 asphalt binder, n—an asphalt-based cement that is produced from petroleum residue either with or without the addition of ...

get price

Standard Test Method for Determining the Flexural Creep ...

Standard Test Method for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR) 1 This standard is issued under the Þxed designation D 6648; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision.

get price

DIME - Print Sample Report

Jul 13, 2021  CT HQ - Sacramento Asphalt Binder Laboratory 2021-07-13-24-2 AASHTO T315-20: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)

get price

Method of Acceptance for Asphalt Binders

• T240-Rolling Thin-Film Oven Test • T 313- Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR) • T 315- Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) • T 316- Viscosity Determination of Asphalt Binder Using ...

get price

PROVISIONAL METHOD OF TEST FOR MIXTURE DESIGN AND

AASHTO T 283 Standard Method of Test for Resistance of Compacted Asphalt Mixtures to Moisture -Induced Damage . AASHTO T 308 Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method . AASHTO T 312 Standard Method of Test for Prepa ring and Determining the

get price

METHOD OF TEST FOR COMBINING GRADATIONS FOR HOT

AASHTO T 308 — Standard Method of Test for Determining the Asphalt Binder Content of HMA by the Ignition Method. AASHTO PP78 — Standard Practice for Design Considerations When Using RAS in Asphalt Mixtures. ASTM D2172 — Standard Test Methods for Quantitative Extraction of Bitumen From Bituminous Paving Mixtures

get price

Estimating Fatigue Resistance of Asphalt Binders Using the ...

D 2872, Standard Test Method for Effect of Heat and Air on a Moving Film of Asphalt (Rolling Thin-Film Oven Test) D 6521, Standard Practice for Accelerated Aging of Asphalt Binder Using a Pressurized Aging Vessel (PAV) D 7175, Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer 3 ...

get price

Estimating Damage Tolerance of Asphalt Binders Using the ...

D 2872, Standard Test Method for Effect of Heat and Air on a Moving Film of Asphalt (Rolling Thin-Film Oven Test) D 6521, Standard Practice for Accelerated Aging of Asphalt Binder Using a Pressurized Aging Vessel (PAV) D 7175, Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer 3 ...

get price

CMT "Hands-On" Performance Examinations - Asphalt ...

Standard Method of Test for Asphalt Binder Content of Asphalt Mixtures by the Nuclear Method AASHTO T 308-18. Standard Method of Test for Determining the Asphalt Binder Content of Asphalt Mixtures by the Ignition Method. Concrete ASTM C31 / C31M-17 (AASHTO T 23-18) Standard Practice for Making Curing Concrete Test Specimens in the Field

get price

Determining the Flexural Creep Stiffness of Asphalt Binder ...

Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR) AASHTO Designation: T 313-12 1. SCOPE 1.1. This test method covers the determination of the flexural creep stiffness or compliance of asphalt binders by means of a bending beam rheometer. It is applicable to material having

get price

Standard Method of Test for Determining Asphalt Binder ...

AASHTO T 361, 2016 Edition, 2016 - Standard Method of Test for Determining Asphalt Binder Bond Strength by Means of the Binder Bond Strength (BBS) Test This test method quantifies the tensile force needed to remove a pull-off stub adhered to a solid substrate with asphalt binder.

get price

DIME - Print Sample Report

Jun 07, 2021  AASHTO T313-19: Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR) 07/20/2021: Not scheduled: Juan Gomez: CT HQ - Sacramento Asphalt Binder Laboratory: 2021-06-07-38-6: AASHTO T301-13: Standard Method of Test for Elastic Recovery Test of Asphalt Materials by Means of a ...

get price

DETERMINATION OF BINDER CONTENT FOR ASPHALT MIX

DETERMINATION OF BINDER CONTENT FOR ASPHALT MIX STANDARD IRC: SP 11 –1988 (Appendix - 5), ASTM D 2172. OBJECTIVE To determine the binder content in the asphalt mix by cold solvent extraction APPARTUS Centrifuge Balance of capacity 500 gram and sensitivity 0.01grams. Thermostatically controlled oven with capacity up to 2500C.

get price

AASHTO T 313 : Standard Method of Test for Determining the ...

AASHTO T 313, 2019 Edition, 2019 - Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR) This test method covers the determination of the flexural creep stiffness or compliance of asphalt binders by means of a bending beam rheometer.

get price

ASTM D7175-08 - Standard Test Method for Determining the ...

ASTM D7175-08 Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer. 1.1 This test method covers the determination of the dynamic shear modulus and phase angle of asphalt binders when tested in

get price

ASTM-D7175 Standard Test Method for Determining the ...

1.1 This test method covers the determination of the dynamic shear modulus and phase angle of asphalt binders when tested in dynamic (oscillatory) shear using parallel plate geometry. It is applicable to asphalt binders having dynamic shear modulus values in the range from 100 Pa to 10 MPa. This range in modulus is typically obtained between 4 and 88°C at 10 rad/s.

get price

ASTM-D6723 Standard Test Method for Determining the ...

The test method is designed to measure the strength of the asphalt binder at the critical cracking temperature. The asphalt binder has limited ability to resist stress without cracking. In the asphalt binder Specification D 6373, failure stress is used to determine the critical cracking temperature.

get price

Standard Test Method for Determining the Flexural Creep ...

Standard Test Method for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR) 1 This standard is issued under the Þxed designation D 6648; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision.

get price

STANDARD METHODS OF TESTS

Jul 01, 2019  NDT C 1602 Standard Test Method for Mixing Water Used in the Production of Hydraulic Cement Concrete . NDT D 512 Standard Test Method for Chloride Ion in Water . ... AASHTO T 308 Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method . ASTM C 31 Making and Curing Concrete Test Specimens

get price

pdf Download AASHTO TP 123: Standard Method of Test for ...

This test method covers the Binder Yield Energy Test (BYET) for evaluation of asphalt binders’ resistance to yield-type failure under monotonic constant shear-rate loading using the Dynamic Shear Rheometer (DSR). This test procedure can also be adapted for performing surrogate test procedure using the DSR in place of the conventional ductility test (T 51), and the Elastic Recovery test (ASTM ...

get price

Method of Acceptance for Asphalt Binders

• T 315- Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) • T 316- Viscosity Determination of Asphalt Binder Using Rotational Viscometer • T 350-Multiple Stress Creep Recovery (MSCR) Test of Asphalt Binder Using a Dynamic Shear Rheometer 2.2. ASTM Standards

get price

METHOD OF TEST FOR COMBINING GRADATIONS FOR HOT

AASHTO T 308 — Standard Method of Test for Determining the Asphalt Binder Content of HMA by the Ignition Method. AASHTO PP78 — Standard Practice for Design Considerations When Using RAS in Asphalt Mixtures. ASTM D2172 — Standard Test Methods for Quantitative Extraction of Bitumen From Bituminous Paving Mixtures

get price

Viscosity Determination of Asphalt Binder Using Rotational ...

Standard Method of Test for Viscosity Determination of Asphalt Binder Using Rotational Viscometer AASHTO Designation: T 316-13 1. SCOPE 1.1. This test method outlines the procedure for measuring the viscosity of asphalt binders at elevated temperature from 60 to over 200°C using a Rotational Viscometer apparatus as specified by M 320 and R 29 ...

get price

Determining the Rheological Properties of Asphalt Binder ...

Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) AASHTO Designation: T 315-12 1. SCOPE 1.1. This test method covers the determination of the dynamic shear modulus and phase angle of asphalt binder when tested in dynamic (oscillatory) shear using parallel plate test ...

get price

ASTM D 6723 : 2012 Standard Test Method for Determining ...

May 02, 2012  1.1 This test method covers the determination of the failure strain and failure stress of asphalt binders by means of a direct tension test. It can be used with unaged material or with material aged using Test Method D2872 (RTFOT), Practice D6521 (PAV), or AASHTO T240 (RTFOT) and AASHTO PP1 (PAV). The test apparatus is designed for testing within the temperature range from +6

get price

pdf Download AASHTO T 350: Standard Method of Test for ...

This test method covers the determination of percent recovery and nonrecoverable creep compliance of asphalt binders by means of the Multiple Stress Creep Recovery (MSCR) test. The MSCR test is conducted using the Dynamic Shear Rheometer (DSR) at a specified temperature. It is intended for use with residue from T 240 (Rolling Thin-Film Oven Test (RTFOT)). The percent recovery value is ...

get price